Category overview of product type 'Waterbased Release Agent'
Release Agent DRW-225 is a water-based release agent designed for the pressure die casting of magnesium alloys. Release Agent DRW-225 is a concentrate. The ready to use mixture is obtained by diluting 1:100 with water.
Residues in and on the mould are minimized. The stability of the ready to use mixture, even with hard water is perfect.
Pressure die casting of magnesium alloys
Fiberline 402 FR 9 is a combination of a release agent and wetting agent for the MDF and Particle board industry.
Fiberline 402 FR 9 can be diluted 1:10 with water and should be sprayed continuously on the fibres/chips and press plates / belts.
Fiberline 402 FR 9 is especially suitable for Weko or Imal system.
Fiberline 402 FR 9 works also excellent for thin MDF / HDF boards and door skins.
Fiberline 402 FR 9 will form an excellent surface of the produced boards. We recommend for such application a 1:10 dilution with water and up to 15 mg per m2 sprayed on the fibres.
Fiberline 402 FR 9 can be used also with higher dilutions in the particle board industry.
Fiberline 402 FR 9 can be used at:
- Bison Mende presses
- Continuos presses
- Multidaylight presses
Fiberline 403 BP is a combination of a wetting agent and a release agent for the Particle Board, OSB and MDF industry.
Fiberline 403 BP can be diluted 1:10 – 1:50 with water and must be sprayed continuously on the chips / fibres and press plates.
Fiberline 403 BP is especially suitable for Weko-Imal system but can be used also with regular spray guns.
Fiberline 403 BP can be used at:
- Single presses
- Multidaylight presses
- Continuous presses
Fiberline 403 X is a combination of a wetting agent and a release agent for the Particle Board and MDF industry.
Fiberline 403 X can be diluted 1:50 – 1:100 with water and must be sprayed continuously on the chip / fibre mat and press plates.
Fiberline 403 X is also suitable for the production of thin boards
Fiberline 403 X can be used at:
- Single presses
- Multidaylight presses
- Continuos presses
TM-128 PP is designed as a water based mould release agent for thermosetting resins.
TM-128 PP is a mix of special waxes and synthetic resins in water. It provides a durable film capable of giving excellent release and lubrication per application.
TM-128 PP is especially suitable for the production of pipes in the filament winding process.(Epoxy,Polyester)
Y-10100-38 is a semipermanent release agent especially designed for headliners
Y-10100-38 is a waterbased release agent and ready to use.
Y-10100-38 gives an excellent surface of the produced parts..
Y-10100-38 reduces build-up on the moulds and will give excellent release and lubrication.
Headliners, PUR,Thermoplastic and Phenolic
TM- 125 E is designed as a water based mould release agent for phenolic, and other thermosetting resins.
TM-125 E is a mix of a low amount of special waxes and synthetic resins in water. It provides a durable film capable of giving excellent releases per application.
TM-125 E is especially suitable for the production of brake pads, brake linings and clutch linings
TM-125 E can be diluted 1:5 -1:10 with water before used.
TM- 125 F is designed as a water based mould release agent for phenolic, and other thermosetting resins.
TM-125 F is a mix of synthetic resins in water. It provides a durable film capable of giving excellent releases per application.
TM-125 F is especially suitable for the production of brake pads, brake linings and clutch linings
TM-125 F can be diluted 1:3 -1:8 with water before used.
Y-10111-4 is a semipermanent release agent especially designed for headliners
Y-10111-4 is a water based release agent and ready to use.
Y-10111-4 gives an excellent surface of the produced parts..
Y-10111-4 reduces build-up on the moulds and will give excellent release and lubrication.
Headliners, PUR, Thermoplastic and Phenolic
Release Agent DRW-210/2 is a water-based release agent designed for the pressure die casting of aluminium alloys. Release Agent DRW-210 /2 is a concentrate. The ready to use mixture is obtained by diluting 1:50 - 1:100 with water.
Residues in and on the mould are minimized. The stability of the ready to use mixture, even with hard water is perfect.
Pressure die casting of aluminium alloys
Fiberline 413 is a special release agent for MDI bonded Particle Board, OSB and MDF boards.
Fiberline 413 can be used as it supplied or diluted 1:1 with water and must be sprayed continuously into the blow line. Consumption is approx. in the range of 0.15 % - 0.30 % based upon dry measure of fibre. (Face only)
Fiberline 413 is especially suitable for the production of such boards with single presses or multidaylight presses.
Fiberline 409 K 100 is a special release agent for the Particle Board, OSB and MDF industry.
Fiberline 409 K 100 can be diluted 1:3 – 1:6 with water and must be applied continuously on the belts/press plates. Dilution ratio depends on possible spray volume per m².
Fiberline 409 K 100 is especially developed for PMDI boards.
Fiberline 409 K 100 can be applied by spray guns or Weko/Imal system.
Fiberline 409 K 100 are mainly used at continuous press lines
Release Agent PU-540 NE is a water-based release system designed for the production of seat cushions in the cold cure process and for backfoaming of carpets/rubber mats.
Release Agent PU-540 NE is water thin liquid and ready to use.
Release Agent PU-540 NE gives an excellent open cell structure and a dry finish of the produced parts.
Release Agent PU -540 NE reduces build-up on moulds when applied according to instructions.
Cold cure process, flexible foams.
PVA Clear plus is a long lasting protection coating for high temperature stability and abrasion resistance.
PVA Clear plus is liquid and ready to use and can be use also as release agent. The system becomes functional after cure. The film is micro thin and stable until 250°C.
PVA Clear plus adheres to surfaces and provides excellent release and protection properties.
PVA Clear plus will reduce build up.
Universal coating, for example FRP, Polymer Concrete