Category overview of application range 'Acrylic resins'
Dexcoat 1 is a semipermanent release agent with low slip properties for all kind of Thermoset resins. Gives multiple releases per application and an excellent surface of the produced parts. Especially suitable for Gelcoat resin. Dexcoat 1 is easy to polish and has a low odour!
Dexcoat 7 is a semipermanent release agent with midsize slip properties for all kind of Thermoset resins. Gives multiple releases per application and an excellent surface of the produced parts. Especially suitable for Gelcoat resin. Dexcoat 7 is easy to polish and has a low odour!
G-161X is a very efficient internal release agent with lubricant properties, formulated for polyester- epoxy and acrylic resins .
G-161X is free of silicones. Due to its chemical consistency G-161X allows for post- treatment after release such as painting or foaming on top of the created surface without any additional treatment such as sanding.
G-161 X will achieve a more water resistant surface of the produced parts.
Internal release agent especially designed for Pultrusion. Can be used for Polyester-, Acrylic-, Epoxy- and Phenolic Resin.
SF-17/ 2 is designed as a mould release agent for epoxy, polyester, vinyl ester, phenolic and other thermosetting resins. SF-17/2 is an advanced polymeric resin in a non- chlorinated organic solvent blend. It provides a durable film capable of giving many releases per application and will not contaminate the released surface. SF-17/2 is especially suitable for Gelcoats.
SF-17/11 is designed as a mould release agent for epoxy, polyester, vinyl ester, phenolic and other thermosetting resins. SF-17/11 is an advanced polymeric resin in a non- chlorinated organic solvent blend. It provides a durable film capable of giving many releases per application and will not contaminate the released surface. The separating film is very robustly and temperature stably to more than 260°C
SF-19 is designed as a mould release agent for epoxy, polyester, vinyl ester, phenolic and other thermosetting resins. SF-19 is an advanced polymeric resin in a non- chlorinated organic solvent blend. It provides a durable film capable of giving many releases per application and will not contaminate the released surface.
HardWax 103 is designed as a mould release agent for polyester, vinyl ester, and other thermosetting resins. HardWax 103 is a mix of special waxes in past form.It provides a durable film capable of giving many releases per application.
TM-128 PP is designed as a water based mould release agent for thermosetting resins.
TM-128 PP is a mix of special waxes and synthetic resins in water. It provides a durable film capable of giving excellent release and lubrication per application.
TM-128 PP is especially suitable for the production of pipes in the filament winding process.(Epoxy,Polyester)
TM- 111 SVX 3 is designed as a mould release agent for thermosetting resins. TM- 111 SVX 3 is a mix of special waxes and synthetic resins in solvents.
It provides a durable film capable of giving excellent releases and lubrications per application.
TM-111 SVX 3 is especially suitable for the production of Epoxy- and Polyester pipes
Additive 109 is a very efficient internal wetting agent formulated for polyester- and acrylic resins .
Additive 109 is free of silicones. Due to its chemical consistency Additive 109 will give a better flow and distribution of the resin / gelcoat. Additive 109 will help to avoid to create “fish eyes and stripes” on mold surfaces caused by semipermanent mold release agents.
When added to polyester and other resins, Additive 189 acts to suppress Hazardous air pollutants (HAP’s) such as styrene, and methyl methacrylates in excess of 50% with no negative effect on interlaminar bonding, as can be experienced when using conventional suppressants.
DexSeal is designed as a sealer for epoxy, polyester, vinyl ester, phenolic and other thermosetting resins. DexSeal is an advanced polymeric resin in a non- chlorinated organic solvent blend. It provides a durable film capable of giving many releases per application and will not contaminate the released surface.
Dexcoat FW is a unique combination of a wax and a semi-permanent polymer release agent. This combination provides the user with the advantages of an easy-to-apply liquid wax and the multiple release performance of a polymer resin. By incorporating a wax into the formulation, a visible film is produced that enables easy, user-friendly application and complete mold coverage.
In the resin transfer molding (RTM) application a fast and easy resin impregnation of the fibre glass is necessary to improve the resin flow rate to fill the mold in a short cycle time.
Additive 139 is a very efficient additive formulated for such application..
Additive 139 is free of silicones.
Due to its chemical consistency Additive 139 offers a combined effect of higher filler loading,shorter cycle time and better surface (e.g. less porosity)
To ensure a high laminate quality with good surface appearance and a fast and easy production, an improved deaeration with good fibre glass penetration is necessary.
Additive 149 is a very efficient additive formulated for laminate resins.
Additive 149 is free of silicones.
Due to its chemical consistency Additive 149 offers a combined effect of good air release and excellent fibre wetting in laminate resins.
Aquacoat SF-196 is designed as a mould release agent for epoxy, polyester, vinyl ester, phenolic and other thermosetting resins. Aquacoat SF-196 is an advanced polymeric resin in water. It provides a durable film capable of giving many releases per application and will not contaminate the released surface.
The separating film is very robustly and temperature stably after the to more then 280°C