Category overview of application range 'Friction Material'
When added to polyester and other resins, Additive 189 acts to suppress Hazardous air pollutants (HAP’s) such as styrene, and methyl methacrylates in excess of 50% with no negative effect on interlaminar bonding, as can be experienced when using conventional suppressants.
Y-10100-38 is a semipermanent release agent especially designed for headliners
Y-10100-38 is a waterbased release agent and ready to use.
Y-10100-38 gives an excellent surface of the produced parts..
Y-10100-38 reduces build-up on the moulds and will give excellent release and lubrication.
Headliners, PUR,Thermoplastic and Phenolic
TM- 125 E is designed as a water based mould release agent for phenolic, and other thermosetting resins.
TM-125 E is a mix of a low amount of special waxes and synthetic resins in water. It provides a durable film capable of giving excellent releases per application.
TM-125 E is especially suitable for the production of brake pads, brake linings and clutch linings
TM-125 E can be diluted 1:5 -1:10 with water before used.
TM- 125 F is designed as a water based mould release agent for phenolic, and other thermosetting resins.
TM-125 F is a mix of synthetic resins in water. It provides a durable film capable of giving excellent releases per application.
TM-125 F is especially suitable for the production of brake pads, brake linings and clutch linings
TM-125 F can be diluted 1:3 -1:8 with water before used.
Y-10111-4 is a semipermanent release agent especially designed for headliners
Y-10111-4 is a water based release agent and ready to use.
Y-10111-4 gives an excellent surface of the produced parts..
Y-10111-4 reduces build-up on the moulds and will give excellent release and lubrication.
Headliners, PUR, Thermoplastic and Phenolic