Category overview of product type 'Semi-Permanent Release Agent'
Dexcoat 1 is a semipermanent release agent with low slip properties for all kind of Thermoset resins. Gives multiple releases per application and an excellent surface of the produced parts. Especially suitable for Gelcoat resin. Dexcoat 1 is easy to polish and has a low odour!
Dexcoat 7 is a semipermanent release agent with midsize slip properties for all kind of Thermoset resins. Gives multiple releases per application and an excellent surface of the produced parts. Especially suitable for Gelcoat resin. Dexcoat 7 is easy to polish and has a low odour!
SF-17/ 2 is designed as a mould release agent for epoxy, polyester, vinyl ester, phenolic and other thermosetting resins. SF-17/2 is an advanced polymeric resin in a non- chlorinated organic solvent blend. It provides a durable film capable of giving many releases per application and will not contaminate the released surface. SF-17/2 is especially suitable for Gelcoats.
SF-17/11 is designed as a mould release agent for epoxy, polyester, vinyl ester, phenolic and other thermosetting resins. SF-17/11 is an advanced polymeric resin in a non- chlorinated organic solvent blend. It provides a durable film capable of giving many releases per application and will not contaminate the released surface. The separating film is very robustly and temperature stably to more than 260°C
SF-19 is designed as a mould release agent for epoxy, polyester, vinyl ester, phenolic and other thermosetting resins. SF-19 is an advanced polymeric resin in a non- chlorinated organic solvent blend. It provides a durable film capable of giving many releases per application and will not contaminate the released surface.
Y-10100-38 is a semipermanent release agent especially designed for headliners
Y-10100-38 is a waterbased release agent and ready to use.
Y-10100-38 gives an excellent surface of the produced parts..
Y-10100-38 reduces build-up on the moulds and will give excellent release and lubrication.
Headliners, PUR,Thermoplastic and Phenolic
Dexcoat FW is a unique combination of a wax and a semi-permanent polymer release agent. This combination provides the user with the advantages of an easy-to-apply liquid wax and the multiple release performance of a polymer resin. By incorporating a wax into the formulation, a visible film is produced that enables easy, user-friendly application and complete mold coverage.
Aquacoat SR-61T is a semi-permanent water-based release system designed for moulding operations when non-transfer of release agent, high temperature stability, high degree of slip, and abrasion resistance of the release film are important.
Aquacoat SR-61T is water thin liquid and ready to use. The release system becomes functional after cure. The release film is micro thin and stable until 260°C.
Aquacoat SR-61T adheres to mould surfaces and provides multiple releases with virtually no transfer to moulded parts.
Aquacoat SR-61T reduces build-up on moulds when applied according to instructions.
Rubber, all kind of rubber-types and rubber moulding. Especially suitable for the production of tires.
MRA-100 is a semi-permanent water-based release system designed for moulding operations when non-transfer of release agent, high temperature stability, high degree of slip, and abrasion resistance of the release film are important.
MRA-100 is water thin liquid and ready to use. The release system becomes functional after cure. The release film is micro thin and stable until 260°C.
MRA-100 adheres to mould surfaces and provides multiple releases with virtually no transfer to moulded parts.
MRA-100 reduces build-up on moulds when applied according to instructions.
Rubber, all kind of rubber-types and rubber moulding. Especially suitable for the production of tires.
Glasscoat 754 is applied to blank and mould equipment to facilitate a start-up during job changes. Glasscoat 754 will ensure a smooth start-up and minimize lost production. Glasscoat 754 allows operators to focus their attention on fine-tuning various parameters of the I.S. machine and checking bottle quality, rather than on swabbing. This contributes to minimizing the time required to start producing bottles of acceptable quality.
Rather than waiting 10 to 20 minutes to pack the first bottle after a job change, with a good pre-coat, production of bottles of an acceptable quality can usually begin right away assuming that the mould equipment is heated to operating temperature before being put into service.
Glasscoat 754 a water based semi-permanent, non-toxic, non-hazardous coating used as a glass release agent for blanks, molds, neck rings, bottom plates, and related equipment in the glass container industry. It is supplied as a 1- component product. Glasscoat 754 is a mix of surfactants, polymers, adhesives and graphite.
Glasscoat 754 should be applied by a spray gun and will form a smooth, uniform, tightly bonded film of graphite onto mold equipment surfaces.
Aquacoat SR-61TO is a semi-permanent water-based release system designed for moulding operations when non-transfer of release agent, high temperature stability, high degree of slip, and abrasion resistance of the release film are important.
Aquacoat SR-61TO is water thin liquid and ready to use. The release system becomes functional after cure. The release film is micro thin and stable until 260°C.
Aquacoat SR-61TO adheres to mould surfaces and provides multiple releases with virtually no transfer to moulded parts.
Aquacoat SR-61TO reduces build-up on moulds when applied according to instructions.
Rubber, all kind of rubber-types and rubber moulding. Especially suitable for the production of conveyor belts
SK-44 M is a semi-permanent water-based release system designed for moulding operations when non-transfer of release agent, high temperature stability, high degree of slip, and abrasion resistance of the release film are important.
SK-44 M is water thin liquid and ready to use. The release system becomes functional after cure. The release film is micro thin and stable until 260°C.
SK-44 M adheres to mould surfaces and provides multiple releases with virtually no transfer to moulded parts.
SK-44 M reduces build-up on moulds when applied according to instructions.
Silicone rubber, will give an excellent matt surface of the produced parts.
Aquacoat 6 A is a semi-permanent water-based release system designed for moulding operations when non-transfer of release agent, high temperature stability, high degree of slip, and abrasion resistance of the release film are important.
Aquacoat 6 A is water thin liquid and ready to use. The release system becomes functional after cure. The release film is micro thin and stable until 260°C.
Aquacoat 6 A adheres to mould surfaces and provides multiple releases with virtually no transfer to moulded parts.
Aquacoat 6 A reduces build-up on moulds when applied according to instructions.
Rubber, all kind of rubber-types and rubber moulding.
TM-890 TF is a teflon based release system designed for moulding operations when high temperature stability, high degree of slip, and abrasion resistance of the release film are important.
TM-890 TF is liquid and ready to use. The release film is microthin and stable until 400 °C.
TM-890 TF reduces build-up on moulds when applied according to instructions.
Thermoplastic,Rubber. Universal usage
Aquacoat SR-635 XB is a semi-permanent water-based release system designed for moulding operations when non-transfer of release agent, high temperature stability, high degree of slip, and abrasion resistance of the release film are important.
Aquacoat SR-635 XB is water thin liquid and ready to use. The release system becomes functional after cure. The release film is micro thin and stable until 260°C.
Aquacoat SR-635 XB adheres to mould surfaces and provides multiple releases with virtually no transfer to moulded parts.
Aquacoat SR-635 XB reduces build-up on moulds when applied according to instructions.
Thermoplastic, all kind of Thermoplastic-types. Especially suitable for Rotational Molding
Y-10100-82 GR 3 is a universal release agent for Polyurethane and Rotational Molding
Y-10100-82 GR 3 is a high solid release agent and ready to use.
Y-10100-82 GR 3 gives an excellent surface of the produced parts..
Y-10100-82 GR 3 reduces build-up on the molds.
Especially suitable for PU-casting and Rotational Molding
Aquacoat SF-196 is designed as a mould release agent for epoxy, polyester, vinyl ester, phenolic and other thermosetting resins. Aquacoat SF-196 is an advanced polymeric resin in water. It provides a durable film capable of giving many releases per application and will not contaminate the released surface.
The separating film is very robustly and temperature stably after the to more then 280°C
Aquacoat SR-43 B is a semi-permanent water-based release system designed for moulding operations when non-transfer of release agent, high temperature stability, high degree of slip, and abrasion resistance of the release film are important.
Aquacoat SR-43 B is water thin liquid and ready to use. The release system becomes functional after cure. The release film is micro thin and stable until 260°C.
Aquacoat SR-43 B adheres to mould surfaces and provides multiple releases with virtually no transfer to moulded parts.
Aquacoat SR-43 B reduces build-up on moulds when applied according to instructions.
Rubber, all kind of rubber-types and rubber moulding.