Category overview of application range 'Phenolic resins'
Dexcoat 1 is a semipermanent release agent with low slip properties for all kind of Thermoset resins. Gives multiple releases per application and an excellent surface of the produced parts. Especially suitable for Gelcoat resin. Dexcoat 1 is easy to polish and has a low odour!
Dexcoat 7 is a semipermanent release agent with midsize slip properties for all kind of Thermoset resins. Gives multiple releases per application and an excellent surface of the produced parts. Especially suitable for Gelcoat resin. Dexcoat 7 is easy to polish and has a low odour!
G-161X is a very efficient internal release agent with lubricant properties, formulated for polyester- epoxy and acrylic resins .
G-161X is free of silicones. Due to its chemical consistency G-161X allows for post- treatment after release such as painting or foaming on top of the created surface without any additional treatment such as sanding.
G-161 X will achieve a more water resistant surface of the produced parts.
Internal release agent especially designed for Pultrusion. Can be used for Polyester-, Acrylic-, Epoxy- and Phenolic Resin.
SF-17/ 2 is designed as a mould release agent for epoxy, polyester, vinyl ester, phenolic and other thermosetting resins. SF-17/2 is an advanced polymeric resin in a non- chlorinated organic solvent blend. It provides a durable film capable of giving many releases per application and will not contaminate the released surface. SF-17/2 is especially suitable for Gelcoats.
SF-17/11 is designed as a mould release agent for epoxy, polyester, vinyl ester, phenolic and other thermosetting resins. SF-17/11 is an advanced polymeric resin in a non- chlorinated organic solvent blend. It provides a durable film capable of giving many releases per application and will not contaminate the released surface. The separating film is very robustly and temperature stably to more than 260°C
SF-19 is designed as a mould release agent for epoxy, polyester, vinyl ester, phenolic and other thermosetting resins. SF-19 is an advanced polymeric resin in a non- chlorinated organic solvent blend. It provides a durable film capable of giving many releases per application and will not contaminate the released surface.
HardWax 103 is designed as a mould release agent for polyester, vinyl ester, and other thermosetting resins. HardWax 103 is a mix of special waxes in past form.It provides a durable film capable of giving many releases per application.
TM-128 PP is designed as a water based mould release agent for thermosetting resins.
TM-128 PP is a mix of special waxes and synthetic resins in water. It provides a durable film capable of giving excellent release and lubrication per application.
TM-128 PP is especially suitable for the production of pipes in the filament winding process.(Epoxy,Polyester)
TM- 111 SVX 3 is designed as a mould release agent for thermosetting resins. TM- 111 SVX 3 is a mix of special waxes and synthetic resins in solvents.
It provides a durable film capable of giving excellent releases and lubrications per application.
TM-111 SVX 3 is especially suitable for the production of Epoxy- and Polyester pipes
Y-10100-38 is a semipermanent release agent especially designed for headliners
Y-10100-38 is a waterbased release agent and ready to use.
Y-10100-38 gives an excellent surface of the produced parts..
Y-10100-38 reduces build-up on the moulds and will give excellent release and lubrication.
Headliners, PUR,Thermoplastic and Phenolic
DexSeal is designed as a sealer for epoxy, polyester, vinyl ester, phenolic and other thermosetting resins. DexSeal is an advanced polymeric resin in a non- chlorinated organic solvent blend. It provides a durable film capable of giving many releases per application and will not contaminate the released surface.
Dexcoat FW is a unique combination of a wax and a semi-permanent polymer release agent. This combination provides the user with the advantages of an easy-to-apply liquid wax and the multiple release performance of a polymer resin. By incorporating a wax into the formulation, a visible film is produced that enables easy, user-friendly application and complete mold coverage.
TM- 125 E is designed as a water based mould release agent for phenolic, and other thermosetting resins.
TM-125 E is a mix of a low amount of special waxes and synthetic resins in water. It provides a durable film capable of giving excellent releases per application.
TM-125 E is especially suitable for the production of brake pads, brake linings and clutch linings
TM-125 E can be diluted 1:5 -1:10 with water before used.
TM- 125 F is designed as a water based mould release agent for phenolic, and other thermosetting resins.
TM-125 F is a mix of synthetic resins in water. It provides a durable film capable of giving excellent releases per application.
TM-125 F is especially suitable for the production of brake pads, brake linings and clutch linings
TM-125 F can be diluted 1:3 -1:8 with water before used.
Y-10111-4 is a semipermanent release agent especially designed for headliners
Y-10111-4 is a water based release agent and ready to use.
Y-10111-4 gives an excellent surface of the produced parts..
Y-10111-4 reduces build-up on the moulds and will give excellent release and lubrication.
Headliners, PUR, Thermoplastic and Phenolic
Aquacoat SF-196 is designed as a mould release agent for epoxy, polyester, vinyl ester, phenolic and other thermosetting resins. Aquacoat SF-196 is an advanced polymeric resin in water. It provides a durable film capable of giving many releases per application and will not contaminate the released surface.
The separating film is very robustly and temperature stably after the to more then 280°C
Additive Y-10100-51 is a combination of special oils for the stonewool and glasswool industry.
Additive Y-10100-51 can be added directly to the binder or sprayed continously
Additive Y-10100-51 shows already at low dosages excellent results.
(0.5 % - 3.0 % by weight on liquid binder)
Additive Y-10100-51 doesn`t contain any silicones!
Stonewool
Glasswool
Timber industry
Additive Y-10100-52 is a combination of special Hydrocarbons for the stonewool and glasswool industry.
Additive Y-10100-52 can be added directly to the binder or sprayed continously
Additive Y-10100-52 shows already at low dosages excellent results.
(0.5 % - 3.0 % by weight on liquid binder)
Additive Y-10100-52 doesn`t contain any silicones!
Stonewool
Glasswool
Timber industry
WR-117 F is a combination of special aminofunctional siloxane in water for the stonewool and glasswool industry.
WR-117 F can be added directly to the binder or sprayed continuously.
WR-117 F shows already at low dosages excellent results.
(0.5 % - 3.0 % by weight on liquid binder)
WR-117 F has a solid of approx. 60 %!
Stonewool
Glasswool
Timber industry