Permcoat 1984 green is a permanent solvent based release and coating system designed for moulding and protection operations when non-transfer of release agent, high temperature stability, high degree of slip, and abrasion resistance of the release film are important.
Permcoat 1984 green is liquid and ready to use. The release and coating system becomes functional after cure. The film is micro thin and stable until 600°C.
Permcoat 1984 green adheres to the coated surfaces and provides multiple releases or long lasting protection with no transfer to moulded parts.
Permcoat 1984 green reduces build-up on moulds when applied according to instructions.
Rubber, all kind of rubber-types and rubber moulding (except silicone rubber)
Especiall suitable for protection coatings against bonding agent!
Aquacoat 1984 is a permanent water-based release system and protection coating designed for moulding operations when non-transfer of release agent, high temperature stability, high degree of slip, and abrasion resistance of the release film are important.
Aquacoat 1984 is water thin liquid and ready to use. The release system becomes functional after cure. The release film is micro thin and stable until 450°C.
Aquacoat 1984 adheres to mould surfaces and provides multiple releases with virtually no transfer to moulded parts.
Aquacoat 1984 reduces build-up on moulds when applied according to instructions.
Rubber, all kind of rubber-types and rubber moulding (except silicone rubber)
AntiTack 806 B is a release agent for the treatment of non-vulcanized rubber batches which helps to overcome sticking during storage.
AntiTack 806 B is especially effective when used in Batch Off process.
AntiTack 806 B contains wetting agents as well as film forming polymers to get excellent release properties even with cold flow batches.
AntiTack 806 H is a release agent for the treatment of non-vulcanized rubber batches which helps to overcome sticking during storage.
AntiTack 806 H is especially effective when used in Batch Off process.
AntiTack 806 H contains wetting agents as well as film forming polymers to get excellent release properties even with cold flow batches.
AntiTack 800 PV is a release agent for the treatment of non-vulcanized rubber batches which helps to overcome sticking during storage.
AntiTack 800 PV is especially effective when used in Batch Off process.
AntTtack 800 PV contains wetting agents as well as film forming polymers to get excellent release properties even with cold flow batches.
Aquacoat SR-61TO is a semi-permanent water-based release system designed for moulding operations when non-transfer of release agent, high temperature stability, high degree of slip, and abrasion resistance of the release film are important.
Aquacoat SR-61TO is water thin liquid and ready to use. The release system becomes functional after cure. The release film is micro thin and stable until 260°C.
Aquacoat SR-61TO adheres to mould surfaces and provides multiple releases with virtually no transfer to moulded parts.
Aquacoat SR-61TO reduces build-up on moulds when applied according to instructions.
Rubber, all kind of rubber-types and rubber moulding. Especially suitable for the production of conveyor belts
SK-44 M is a semi-permanent water-based release system designed for moulding operations when non-transfer of release agent, high temperature stability, high degree of slip, and abrasion resistance of the release film are important.
SK-44 M is water thin liquid and ready to use. The release system becomes functional after cure. The release film is micro thin and stable until 260°C.
SK-44 M adheres to mould surfaces and provides multiple releases with virtually no transfer to moulded parts.
SK-44 M reduces build-up on moulds when applied according to instructions.
Silicone rubber, will give an excellent matt surface of the produced parts.
Aquacoat 6 A is a semi-permanent water-based release system designed for moulding operations when non-transfer of release agent, high temperature stability, high degree of slip, and abrasion resistance of the release film are important.
Aquacoat 6 A is water thin liquid and ready to use. The release system becomes functional after cure. The release film is micro thin and stable until 260°C.
Aquacoat 6 A adheres to mould surfaces and provides multiple releases with virtually no transfer to moulded parts.
Aquacoat 6 A reduces build-up on moulds when applied according to instructions.
Rubber, all kind of rubber-types and rubber moulding.
TM-890 TF is a teflon based release system designed for moulding operations when high temperature stability, high degree of slip, and abrasion resistance of the release film are important.
TM-890 TF is liquid and ready to use. The release film is microthin and stable until 400 °C.
TM-890 TF reduces build-up on moulds when applied according to instructions.
Thermoplastic,Rubber. Universal usage
Aqualube 930 is a new generation of waterbased lubricant system designed for operations when high degree of slip, and fast drying time of the lubricant are important.
Aqualube 930 is water thin liquid and ready to use.Viscosity and drying time can be adjusted to the needs of the customer.
Aqualube 930 will form no residue on the coated surfaces after usage.
Aqualube 930 doesn`t contain solvents, alcohol or silicones!
Universal, especially suitable for pressing rubber into metal-, alu- frames
Aquacoat 830 W is a permanent water-based rubber coating system designed for low and high temperature stability, high degree of slip, and abrasion resistance.
Aquacoat 830 W is a water-based 1 K- system and ready to use. The coating becomes functional after cure. The cured film is micro thin and stable between – 60 and + 200°C.
Aquacoat 830 W adheres to the surface and will give an excellent matt appearance.
Aquacoat 830 W needs only a short drying time.
Rubber, all kind of rubber-types. Especially suitable for the coating of profiles and seals
Aquacoat SR-43 B is a semi-permanent water-based release system designed for moulding operations when non-transfer of release agent, high temperature stability, high degree of slip, and abrasion resistance of the release film are important.
Aquacoat SR-43 B is water thin liquid and ready to use. The release system becomes functional after cure. The release film is micro thin and stable until 260°C.
Aquacoat SR-43 B adheres to mould surfaces and provides multiple releases with virtually no transfer to moulded parts.
Aquacoat SR-43 B reduces build-up on moulds when applied according to instructions.
Rubber, all kind of rubber-types and rubber moulding.