Release Agent DRW-225 is a water-based release agent designed for the pressure die casting of magnesium alloys. Release Agent DRW-225 is a concentrate. The ready to use mixture is obtained by diluting 1:100 with water.
Residues in and on the mould are minimized. The stability of the ready to use mixture, even with hard water is perfect.
Pressure die casting of magnesium alloys
AS-280 is a ready to use high temperature die lubricant paste for metal forming processes.
AS-280 is used as an anti-sticking paste.
AS-280 is applied sparingly to the critical areas of dies used in the pressure die casting of aluminium to prevent metallizing and other adverse effects.
AS-280 is a finely balanced mixture of ingredients which cover hot metal surfaces easily and effectively.
This creates a very thin, highly-adhesive, homogeneous, oily layer.
AS-280 is applied sparingly to the critical areas of dies used in the pressure die casting of aluminium to prevent metallizing and other adverse effects.
LC-290 is a high-temperature paste suitable up to 1000 °C.
LC-290 prevents burning-in of bolts,hinges and screw connections.
LC-290 functions as a long-term coating in the pressure die casting of non ferrous metals and prevents sticking of the molten metal for a long time;easy relubrication without machine shutdown
LC-290 facilitates die assembly and disassembly after an extended period of production.
LC-290 is a high-temperature paste suitable for a temperature range between – 25 and 1000 °C.
It has a chemical composition of hydrocarbon oil and inorganic solid lubricants.
Above a temperature of 200 °C LC-290 functions as a dry lubricant.
LC-290 functions as a long-term coating in the pressure die casting of non ferrous metals and prevents sticking of the molten metal for a long time;easy relubrication without machine shutdown
Release Agent DRW-210/2 is a water-based release agent designed for the pressure die casting of aluminium alloys. Release Agent DRW-210 /2 is a concentrate. The ready to use mixture is obtained by diluting 1:50 - 1:100 with water.
Residues in and on the mould are minimized. The stability of the ready to use mixture, even with hard water is perfect.
Pressure die casting of aluminium alloys
Plunger Lubricant DPL 252 black is a plunger lubricant in pellet form for cold chamber pressure casting machines.
Plunger Lubricant DPL 252 black is a mixture of waxes with special additives.
Plunger Lubricant DPL 252 black is the best solution for larger plunger diameters (>80mm)
Plunger Lubricant DPL 252 black is good to achieve good life time of plungers and sleeves.
Excellent wetting and lubrication for steel and CuBe plunger
Cold Chamber Die Casting Pressure Machines
Plunger Lubricant DPL 252 White is a plunger lubricant in pellet form for cold chamber pressure casting machines.
Plunger Lubricant DPL 252 White is a mixture of waxes with special additives.
Plunger Lubricant DPL 252 White is the best solution for smaller plunger diameters (<80mm)
Plunger Lubricant DPL 252 White is good to achieve good life time of plungers and sleeves.
Excellent wetting and lubrication for steel and CuBe plunger
Cold Chamber Die Casting Pressure Machines
HF-270 provides virtual total safety due to its fire-resistance in all hydraulic equipment operating in an environment of open flames, molten metal, hot metal surfaces, etc., where a fire hazard exists in case of a hydraulic leak.
HF-270 provides good service life for hydraulic components due to its excellent lubricity and anti-wear properties
HF-270– long fluid-life due to much higher ageing stability compared with mineral oil based hydraulic fluid – and last but not least, it is: environmentally well accepted because it is biodegradable to a high extent,easy to handle and nontoxic.
High concentrated release agent for aluminium high pressure die-casting. Doesn't contain any water or wax.